Lifting Operations

Those who have, or required to have ‘hands on’ knowledge and/or responsibilities involving the use of lifting equipment used within their operational environment.

Aim

The aim of the course is to provide selected delegates with basic underpinning knowledge of lifting and slinging to enable them to carry out their lifting operations in accordance with statutory requirements and without risk to health.

Training Objectives

By the end of the course, delegates will be able to:

• Demonstrate knowledge of the basic requirements of legislation, their legal obligations and responsibilities.
• Demonstrate knowledge of force influences, sling configurations and safety precautions.
• Estimate load weights.
• Select appropriate lifting equipment for each lift.
• Carry out pre-use inspection of lifting equipment.
• Use appropriate hand signals.
• Carry out successful lifting operations safely.

Course Content

Theory

• Definitions and Terminology – The responsible person. The competent person, working load limit, safe working load, factor of safety, mass and force units, test and examination, test and thorough examination etc.
• The Law Consideration of the requirements of the law under the health and Safety at Work Act, personal liability and legal obligations relating the use of lifting equipment. Includes an explanation of current British and European Law.
• Video – ‘Plan your slinging’ A systematic approach to slinging operations.
• Force Influences – How to calculate the forces present in slings and other lifting equipment under given loading conditions. Consideration of the ‘uniform load’ and ‘trigonometric rating of slings.

Practical

• Choosing the right sling for the job – Consideration of the different types of slings available, the advantages and disadvantages of each type. Pre-use Inspections.
• How much does it weigh? – The most fundamental question in any slinging operation. Guidance on the estimation of loads of unknown weight.
• Slinging accessories – Hooks, shortening clutches, rigging screws, wire rope grips etc. The correct choice and proper use.
• Slinging operations and assessments – Questions to ask, ‘Do’s and Don’ts’, crane signals and Personal Protective Equipment (PPE)

Achievement Measurement

This one day course is carried out in accordance with the code of practice for the safe use of lifting equipment as published by LEEA, and includes practical lifting operation assessments leading to certification on successful completion.

Days: 1

Ratio: 6:1

Those who have, or required to have ‘hands on’ knowledge and/or responsibilities involving the use of lifting equipment used within their operational environment.

Aim

The aim of this course is to provide selected delegates with basic underpinning knowledge of lifting and slinging to enable them to carry out lifting operations specific to their requirements and their environment in accordance with the law and without risk to health.

Training Objectives

By the end of the course, delegates will be able to:

• Demonstrate knowledge of the basic requirements of legislation, their legal obligations and responsibilities.
• Demonstrate knowledge of force influences, sling configurations and safety precautions.
• Estimate load weights.
  Select appropriate lifting equipment for each lift.
• Carry out pre-use inspection of lifting equipment.
• Use appropriate hand signals.
• Carry out successful lifting operations safely.

Course Content

Theory

• Definitions and Terminology – The responsible person. The competent person, working load limit, safe working load, factor of safety, mass and force units, test and examination, test and thorough examination etc.
• The Law Consideration of the requirements of the law under the health and Safety at Work Act, personal liability and legal obligations relating the use of lifting equipment. Includes an explanation of current British and European Law.
• Video – ‘Plan your slinging’ A systematic approach to slinging operations.
  Force Influences – How to calculate the forces present in slings and other lifting equipment under given loading conditions.
• Consideration of the ‘uniform load’ and ‘trigonometric rating of slings.

Practical

• Choosing the right sling for the job – Consideration of the different types of slings available, the advantages and disadvantages of each type. Pre-use Inspections.
• How much does it weigh? – The most fundamental question in any slinging operation. Guidance on the estimation of loads of unknown weight.
• Slinging accessories – Hooks, shortening clutches, rigging screws, wire rope grips etc. The correct choice and proper use.
• Slinging operations and assessments – Questions to ask, ‘Do’s and Don’ts’, crane signals and Personal Protective Equipment (PPE)

Achievement Measurement

This two day course is carried out in accordance with the code of practice for the safe use of lifting equipment as published by LEEA, and includes practical lifting operation assessments leading to a LEEA accredited certificate on successful completion.

Days: 2

Ratio: 6:1

Target Group

Users of lifting gear and those involved in the inspection or statutory examination of lifting gear in service. It is also suitable for those who are involved with, or give advice to, users of lifting gear.

Aim

The aims of the course are to:

• Provide delegates with a thorough grounding of the law and standards pertaining to lifting gear.
• To teach the statutory requirements for, inspection, rejection and reporting of lifting gear in service.
• To provide some practical advice that will enable those who attend to carry out lifting gear inspections confidently.

Training Objectives

By the end of the course delegates will be able to:

• Carry out statutory ‘in service’ inspections.
• Demonstrate knowledge of examination, storage, marking and handling of lifting gear
• Demonstrate knowledge of terminology, law, standards and safe working practices concerning lifting gear
• Offer sound advise to other users
• Maintain a safe working environment whilst working with lifting gear.

Course Content

• Definitions
• Law and Standards
• Legal Requirements (Health & Safety at Work Act), PUWER, LOLER, European Directives, Supply of Machinery (Safety) Regulations.
• Statutory Certificates & Reporting
• Principles for Selection of Lifting Gear (general)
• Marking, Storage & Handling (general)
• In-service Inspections (general)
• Materials used in lifting gear
• Force influences in lifting gear
• Inspection of lifting gear – Explanation, Demonstration & Imitation, Examination of black museum samples identifying faults, wear and common malpractice etc.
• Videos – Slinging Safely & Chain Slings
• Examination of lifting gear A practical assessment of lifting gear examination carried out on prepared used samples followed by group discussion

Achievement Measurement

This two-day course is carried out in accordance with the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER98) and the Provision and Use of Work Equipment Regulations 1998 (PUWER98) as published by the Health and Safety Executive. It includes a number of short written confirmation tests and a practical lifting gear inspection assessment leading to certification on successful completion.

Days: 2

Ratio: 8:1

The course is designed to refresh the skills and knowledge of delegates who have successfully completed a full Carl Stahl Evita Lifting Gear Examination Course within the last 3-5 years.

Equivalent Inspection courses conducted by other training organisations may be considered acceptable as a pre-qualification for this course (Please refer details and dates to Carl Stahl Evita normally we would require proof of certification in this situation)

Aim

The aim of the course is to: –

• Provide delegates with a thorough grounding of the law and standards pertaining to lifting gear.
• To teach the statutory requirements for, inspection, rejection and reporting of lifting gear in service.
• To provide some practical advice that will enable those who attend to carry out lifting gear inspections confidently.

Training Objectives

By the end of the course delegates will be able to: –

• Carry out statutory ‘in service’ inspections.
• Demonstrate knowledge of examination, storage, marking and handling of lifting gear.
• Demonstrate knowledge of terminology, law, standards and safe working practices concerning lifting gear.
• Offer sound advice to other users.
• Maintain a safe working environment whilst working with lifting gear.

Course Content

• Definitions
• Law and Standards
• Legal Requirements (Health & Safety at Work Act), PUWER, LOLER, European Directives, Supply of Machinery (Safety) Regulations.
• Statutory Certificates & Reporting
• Principles for Selection of Lifting Gear (general)
• Marking, Storage & Handling (general)
• In-service Inspections (general)
• Materials used in lifting gear
• Force influences in lifting gear
• Inspection of lifting gear – Explanation, Demonstration & Imitation, Examination of black museum samples identifying faults, wear and common malpractice etc.
• Examination of lifting gear a practical assessment of lifting gear examination carried out on prepared used samples followed by group discussion.

Achievement Measured

This one-day course is carried out in accordance with the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER98) and the Provision and Use of Work Equipment Regulations 1998 (PUWER98) as published by the Health and Safety Executive. It includes a written confirmation test and a practical lifting gear inspection assessment leading to certification on successful completion.

Ratio 8:1

Target Group

This course is aimed at employees who have been identified and/or selected to carry out ‘in-house’ instruction on lifting operations.

Aim

The aim of the course is to train experienced lifting operatives to instruct other personnel in the safe use of lifting equipment.

Training Objectives

By the end of this course delegates will be able to:

• Recognise the need for the requirements of safe systems of work in relation to lifting operations.
• Instruct operatives on their obligations with respect to statutory requirements relating to lifting operations, Health & Safety at Work Act, Provision and Use of Work Equipment Regulations (PUWER), and Lift Operations and Lifting Equipment Regulations (LOLER).
• Instruct operatives on the safe use of lifting equipment in accordance with the Code of Practice for the Safe Use of Lifting Equipment as published by the Lifting Equipment Engineers Association (LEEA).
• Develop effective training programmes and schedules in lifting operations applicable to their own working environment.
• Measure levels of instruction, by continuous performance review and assessments.

Course Content

• Legislation, an update on all legislation including, Health & Safety at Work Act, PUWER and LOLER.
• Introduction to the LEEA Code of Practice for the safe Use of Lifting Equipment.
• The principle components of the systems approach to training. Analyse training projects, write training objectives, determine training content, select methods of delivery and validation.
• Method of Instructional Techniques (MOIT). Includes valuable principles and techniques of good instruction.
• Delegate teaching practices, designed to practice and assess delegate’s knowledge and ability to instruct.
• Final assessment.

Duration

5 Days intensive, some evening work may be necessary.

Achievement Measurement

Delegate’s progress is monitored by ongoing assessment of up to 3 individual teaching practices, the final of which is used to measure overall performance. A report on each candidate is prepared and certificates are awarded to those that are successful on completion.

General Information

A copy of the LEEA Code of Practice for the Safe Use of Lifting Equipment valued at £135.00 is issued to each candidate at the start of all open courses.

Days: Novice 5 days, Refresher 3 days

Ratio: 6:1

Target Group

Those with a working knowledge of lifting equipment and responsible for, or involved in, the practical aspects of lifting and slinging operations. It is especially suitable for those who manage or likely to manage other Banksmen/Slingers e.g. Service Engineers, Technicians and Supervisors, Managers, Safety Officers etc., and any person who offers or is likely to offer advice and/or assistance to, users of lifting equipment.

Aim

The aim of the course is to provide selected delegates with a thorough grounding of lifting and slinging operations, including employer/employee responsibilities statutory requirements, records and ‘in depth’ safe working practices.

Training Objectives

By the end of the course delegates will be able to: –

• Demonstrate knowledge of the legal requirements, employer/employee obligations and responsibilities, and safe working practices pertaining to the operation of mechanical lifting.
• Outline the principles for the selection of lifting equipment.
• Demonstrate knowledge of force influences for various sling configurations.
• Demonstrate knowledge of weight estimation.
• Select appropriate lifting equipment for various lifting operations.
• Carry out identification and pre-use inspection of lifting equipment.
• Use appropriate hand signals.
• Carry out safe, successful lifting operations and lift plan assessments.

Course Content

• Definitions & Terminology. An explanation of all the commonly used definitions and terminology.
• The Law, Standards and Legal Requirements. including the Health & Safety at Work Act, LOLER, PUWER, Supply of Machinery (Safety) Regulations, and recognised codes of practice.
• Principles for the Selection of Lifting Equipment. Marking, storage and handling, pre-use inspection, assessing the operation, and certification.
• Slinging Methods. Design of slings, choosing the right sling for the job, consideration of the different types of slings available, the advantages and disadvantages of each.
• Videos – Safe Use of Slings and ‘Plan your slinging’ A systematic approach to slinging operations.
• Force Influences – How to calculate the forces present in slings and other lifting equipment under given loading conditions. Consideration of the ‘uniform load’ and ‘trigonometric rating of slings.
• How much does it weigh? – The most fundamental question in any slinging operation. Guidance on the estimation of loads of unknown weight and Slinging Practical.
• Slinging accessories – Hooks, shortening clutches, rigging screws, wire rope grips etc. The correct choice and proper use.
• Written Assessment designed to assess delegates and ensure that instruction has been assimilated.
• Organisation of lifting operations, the key fundamentals of how to plan a lift, correct supervision and carrying out the lift safely, culminating in completing a practical lift plan.
• Slinging operations and assessments – Questions to ask, ‘Do’s and Don’ts’, crane signals and Personal Protective Equipment (PPE)

Achievement Measurement

This two day course is carried out in accordance with the code of practice for the safe use of lifting equipment as published by LEEA, and includes theoretical and practical lifting operation assessments leading to certification on successful completion.

Days: 2

Ratio: 8:1

A course for candidates wishing to achieve a nationally recognised operator qualification, enabling them to operate a lorry mounted crane safely within the workplace.

Aim

The aim of this course is to provide selected delegates with the required knowledge in the use of a Lorry Mounted Crane (HIAB) to enable them to carry out safe lifting operations in their workplace environment in accordance with the law and without risk to health.

Course Content

• The Need To Train
• Health and Safety
• Presentation
• Video
• Introduction to the
• Equipment
• Basic Lifting/Operating
• Negotiating a Simple Course
• Pre-Use Checks
• Excavating at Various Depths
• Advanced Exercise
• Theory Test
• Practical Test
• Course Feedback
• Course Closure

Achievement Measurement

On successful completion of the course, candidates will receive an ITSSAR operators certificate and plastic photo ID card.

Days: 3

Ratio: 3:1

Those identified to use, or responsible for others who use overhead travelling cranes. Delegates must be physically fit, have good eyesight, hearing ability and be able to judge distances.

Aim

The aim of this course is to train selected delegates in the safe operation and effective use of overhead travelling cranes in their workplace. Two separate courses are available to meet the needs of those with floor controls or cab controls. The duration of each programme is dependant upon experience, 1 day for experienced operatives, 2 to 3 days for those with little or no experience.

Objectives

• By the end of the course delegates will be able to:
• Operate the crane safely in accordance with manufacturers handbook and accepted codes of practice.
• Demonstrate knowledge of the concepts set out in PM55 “Safe working with overhead cranes”.
• Demonstrate an understanding of the controls of the particular model used during the training.
• Demonstrate knowledge of the proper use of lifting tackle.
• Estimate the weight of loads.
• Use appropriate communications.

Course Content

• Health & Safety at Work Regulations.
• Lifting gear regulations.
• Lifting gear pre-use inspections.
• Load handling.
• Stacking and de-stacking.
• Correct slinging.
• Handling methods.
• Capacities and effects of sling angles.
• Weight assessment and capacities.
• Signalling

General Information and Achievement Measurement

These courses include assessments and successful completion leads to certification.

Days: 1

Ratio: 6:1

Target Group

Those identified to use, or responsible for others who use an overhead travelling cranes and the associated lifting equipment and accessories to be able to perform a lifting operation. Delegates must be physically fit, have good eyesight, hearing ability and be able to judge distances.

Aim

The aim of this course is to train selected delegates in the safe operation and effective use of overhead travelling cranes in their workplace and to provide delegates with the knowledge of lifting and slinging to enable them to carry out their lifting operations in accordance with statutory requirements and without risk to health.

Objectives

By the end of the course delegates will be able to: –

• Demonstrate knowledge of the basic requirements of legislation, their legal obligations and responsibilities.
• Demonstrate knowledge of force influences, sling configurations and safety precautions.
• Estimate load weights.
• Select appropriate lifting equipment for each lift.
• Carry out pre-use inspection of lifting equipment.
• Use appropriate hand signals.
• Carry out successful lifting operations safely.
• Operate the crane safely in accordance with manufacturer’s handbook and accepted codes of practice.
• Demonstrate an understanding of the controls of the particular model used during the training.
• Demonstrate knowledge of the proper use of lifting tackle.

Course Content

Theory

• Definitions and Terminology – The responsible person. The competent person, working load limit, safe working load, factor of safety, mass and force units, test and examination, test and thorough examination etc.
• The Law Consideration of the requirements of the law under the health and Safety at Work Act.
• Force Influences – How to calculate the forces present in slings and other lifting equipment under given loading conditions. Consideration of the ‘uniform load’ and ‘trigonometric rating of slings.
• Plan your lift. – Basic requirements as laid down in LOLER98.

Practical

• Choosing the right sling for the job – Consideration of the different types of slings available, the advantages and disadvantages of each type. Pre-use Inspections.
• How much does it weigh? – The most fundamental question in any slinging operation. Guidance on the estimation of loads of unknown weight.
• Slinging accessories – Hooks, shortening clutches, rigging screws, wire rope grips etc. The correct choice and proper use.
• Safe use of the overhead travelling crane – Pre-use checks, correct orientation, load movement and control.

Achievement Measurement

This two day course is carried out in accordance with the code of practice for the safe use of lifting equipment as published by LEEA, and includes practical lifting operation assessments leading to a LEEA accredited certificate on successful completion.

Days

2 Days

Ratio

4:1

A four day course aimed at those with a good working knowledge and understanding of cranes and lifting operations and selected for duties as an ‘Appointed Person’ within their own organisation.

Aim

The aim of the course is to train selected delegates in the duties of an ‘Appointed person’:

• A better understanding of statutory requirements.
• Planning of lifts.
• Delegation of duties
• Risk assessment/method statements
• Safe working practices.

Objectives

At the end of this course, trainees will be able to demonstrate sufficient knowledge and practical ability to carry out the duties of the ‘Appointed Person’ and will be able to successfully plan and execute basic lifting operations.

Course Content

• Legislation (LOLER & PUWER)
• Identification of crane parts and components
• Understanding of Crane Rated Capacity Indicator & Limiter
• Risk Assessment/Method Statement
• Crane Duty Charts
• Crane Selection
• Crane Stability and Ground conditions
• Inspection, selection and usage of lifting accessories
• Planning exercises and group analysis

Achievement Measurement

Successful completion of two written test papers and final practical exercise leads to certification.

For the practical exercise delegates are asked to plan a lift. Given all necessary information, they will be required to draw up a risk assessment and a method statement including all relevant documentation and safety certification and drawings of lift and location. The details are to include crane selection, crane location, lifting auxiliary equipment, lifting and placing of the load, and all relevant safety precautions.

Duration

4 days.

Note: As an optional extra, successful delegates can be issued with an identity, proof of assessment and training card; further details and costs of this on request.

Days: 4

Ratio: 8:1

All identified personnel who are required to/and or are responsible for assisting in the manoeuvring and loading/unloading of vehicles.

Aim

The aim of this course is to raise the awareness of candidates to the dangers caused when reversing and introduces the practical techniques and hand signals that will assist drivers in their manoeuvring.

Objectives

Upon successful completion of the course delegates will be able to:

• Reverse vehicles into a confined space in a safe manner.
• Identify likely hazardous areas within a working environment.
• Demonstrate the recommended hand signals in accordance with HSE`s Workplace Transport Safety Guidance (HSG136).
• Guide large goods vehicles both rigid and articulated using the recommended hand signals as stated in the above guidance.

Course Content

The course content and duration varies according to candidate’s requirements and is as follows:

• Legal Requirements
• Case Studies
• Hazard Identification
• Site Safety
• Common Risks
• Written Assessment
• Practical Reversing & Parking

Achievement Measurement

A Certificate of Training is issued to successful candidates. Success is measured by a theoretical and practical assessment.

Days: 1/2 day

Ratio: 3:1

Users of permanent magnetic lifters. Those carrying out “in service” inspection of permanent magnetic lifters. It is also suitable for those who are involved with, or give advice to, users of permanent magnetic lifting equipment

Aim

The aims of the course are to: –

• To provide the delegate with guidance on the operation and safe use of permanent magnetic lifters
• Provide delegates with a thorough grounding of the law relating to the use of and in service inspection of permanent magnetic lifters.
• To provide some practical advice that will enable those who attend to carry out “in service” inspections of permanent magnetic lifters effectively.

Training Objectives

By the end of the course delegates will be able to: –

• Carry out lifting operations using permanent magnetic lifters safely and effectively.
• Carry out “in service” inspection of permanent magnetic lifters.
• Demonstrate knowledge of examination, storage, marking and handling of permanent magnetic lifters.
• Demonstrate knowledge of terminology, law, standards and safe working practices concerning permanent magnetic lifters.
• Offer sound advise to other users.
• Maintain a safe working environment whilst working with permanent magnetic lifters.

Course Content

• Definitions
• Legal Requirements under LOLER
• Marking and Certification requirements
• How permanent magnetic lifters operate
• The effect of air gap
• The effect of material thickness
• How to allow for different steel types
• The effect of contact area
  Environmental considerations (heat, humidity ,etc)
• Rules for the safe operation and use of permanent magnetic lifters
• Effective “ in service” maintenance and inspection of permanent lifting magnets
• Practical exercise
• Multiple choice written assessment

Achievement Measured

This one -day course is carried out in accordance with the code of practice for the safe use of lifting equipment (section 25) as published by LEEA. The course also takes account of manufacturer’s recommendations relative to the safe use of permanent magnetic lifters. It includes a multiple choice confirmation test and a practical lifting assessment leading to certification on successful completion.